Hi!I am building a 360 stroker with 4inch stroke and eddy rpm heads with a good valve job and some clean up, comp is 10,9, and ihave a eddy rpm intake ans a demon 650dp,1,5/8 headers 3 collector . But wath can i do to get most bang for the bucks,The man who is doing the machine job recomande ´me to get compcam XE284h or XE285HL.i have a XE274 now and have stock rockers is it any other cheap parts that would gain hp example windage trail.Thanks Thomas
I have the xe274 solid cam with 1.6 rockers on my 408. its a great cam if you don't mind the matinence of adjusting valves. Personally for a street car I would recommend either of the xe hydraulics mentioned..
roller rockers will add power, so will a higher cfm carb, and 1 3/4 inch tube headers. try a wilson COMBO spacer under an 870 cfm holley vacuum secondary. an H, or X, type exhaust cross over pipe and 3 inch exhaust system will help too.