Recently bought 70 challenger. it was a original 318 *** that was converted to a hemi. All parts seem original except that front disc brakes were installed. I am told that they were from a 1966 or 67 monaco or possibly a satellite. The gentleman could'nt recall. My dillema is that the bleeder valve is broken on the drivers side caliper and was retapped unsuccessfully.The caliper has KH 8188 with #357# under these numbers. the rotor appears to be 11 inches. Can anyone tell me what these are from as I would like to get parts for this. thx.
Most generally, the calipers from the 66-67 cars were all the same. The bracket from a B-body to a C-Body might be different.If your source thinks that they were from a '67 Monaco, take it with you to the auto parts store and see if they are the same?
--------------------Some people are like Slinkys; they're not very useful, but fun to watch when pushed down the stairs.
Hey thanks for the help and suggestions. I took the caliper and brakes to my local Napa store. They were super helpful here. After going through several of their books and taking measurements of the single piston, It was determined that a caliper and brakes from a 1970 charger will work. For under $70 I got back in the saddle again. this piece was originally made by Kelsey Hayes #18866 if that helps anyone. I am not sure about the brackets.