|
|
Item Posts
Sort Order
|
|
|
stroker pistons &crank
|
tzmopar
New User
| Posts: 6
| Joined: 07/08
Posted: 09/14/09
06:13 PM
|
|
i have a 360 .30 over 12.5 comp. standerd crank and rods. block was decked to much & now the piston sticks out .60 thou. im using copper shim & gascket.motor & truck was purchased together. just purchased good block standerd deck height & bore. can i use 4.000 stroker crank and my stock rods and standered 12.5 pistons in new block or do i need stroker assembly or special pistons. thanks ted z.
|
|
|
|
drmopar
Guru
| Posts: 843
| Joined: 02/08
Posted: 09/14/09
10:21 PM
|
|
The pistons for a stroker motor are different than your typical 360 piston.
You can use your rods.
Good Luck
Doc
|
|
|
|
tzmopar
New User
| Posts: 6
| Joined: 07/08
Posted: 09/15/09
06:32 PM
|
|
that is what i thought . thanks for your input ted z.
|
|
|
|
|
|
|
|
|