|
|
Item Posts
Sort Order
|
|
|
'69 spr B- 318 1st then 440..
|
|
Posted: 07/31/09
08:50 AM
|
|
Working on a 1969 Super Bee, if I put a 318 in now and then want to change to a 440 later, is there a suggested radiator that would work for both so I don't have to buy a new one when I get the 440 built? maybe years later? 3 or 4. Thanks!
|
|
|
|
waynep712
New User
| Posts: 29
| Joined: 06/09
Posted: 08/01/09
11:11 PM
|
|
here are the specs for the 440 radiator..
Part Number: 433332
Warranty: LLT
Application: With A/C
Notes: 3 row, 17 1/2" x 25" x 2" core size.
Make: CHRYSLER
Core Size: 17 1/2 x 25 x 2 inch.
Number of Rows: 3
Inlet Tank: 3 x 26 7/8 inch.
Outlet Tank: 3 x 26 7/8 inch.
Inlet: 1 1/2 inch. Top Right
Outlet: 1 3/4 inch. Bottom left
Mounting Type: Flange
Transmission Oil Cooler: 12 inch.
here is a picture of it...
http://contentinfo.autozone.com/znetcs/product-info/en/US/gdi/433332/image/8/
what have you got in there now???????
|
|
|
|
|
Posted: 08/02/09
07:48 AM
|
|
Nothing in there right now, going to start working on the 318 to put in. I got the car with no trans. and no engine, except for the bare 440 block. Then recently traded to get a 318eng. and trans. with 764-3 stamped on it, out of a maybe '68 or '69 plymouth satelite. So the 318 is supposed to have about 32,000 miles on it, and it looks pretty clean, the oil and lifters, so I plan on putting a new gasket set on and getting things worked if they need it. Then later when budget allows will build the 440. But to get it on the road I need, the 318 & trans. to be ready, a radiator, new gas tank, maybe new wiring harness, driveshaft and some bodywork.
|
|
|
|
|
|
|
|
|