|
Num Posts
Sort Order
|
|
Posted: 08/29/08
06:00 PM
|
|
For sale is a freshly machined Dodge magnum 360 block, with loser end of engine. The block has been cleaned up bored .030 over and honed. Camshaft bearings have been installed, and a new bushing for the distributor has also been installed. With the block comes a new crankshaft, main bearings, pistons already hung on the rods, and rod bearings. The block was machined by napa machine shop only a week ago, the reason why I am selling the block is I want an old style LA block not a new magnum, and did not realize this was a magnum till it was too late. I have the receipts from the machine shop for all the parts and what was done to the block. please e-mail me with questions and for photos
|
drmopar
Enthusiast
| Posts: 443
| Joined: 02/08
Posted: 08/29/08
08:18 PM
|
|
Why are you selling? If its because you have LA heads you can make it work by drilling the #4 cam bearing on your magnum to feed oil to the LA heads.
|
|
Posted: 08/30/08
08:00 AM
|
|
I am selling because I want an LA block not a magnum block, and because I went a little over board taking on this project and am starting to run out of money for other projects.
|
|
|
|
Posted: 08/30/08
04:19 PM
|
|
what is the year of the block and price thanks
|
|
Posted: 08/31/08
07:18 AM
|
|
Not exactly sure what year the block is, i know its a newer such as 1995+ block. I am asking $1100 for the block and the lower end, crank, pistons, rods, bearings.... thanks joe
|
|
Posted: 09/01/08
05:46 AM
|
|
Joe ill take it where are you located at Dan
|
|
Posted: 09/01/08
09:55 AM
|
|
I am located in Lockport New York, 14094, its about 30min north of Buffalo
|
|
Posted: 09/01/08
10:51 AM
|
|
I will not ship the motor, so we will have to arrange local pickup of some shorts.
|
|
Posted: 09/01/08
10:05 PM
|
|
Sux to hear However the mag probably doesn't have the old style motor mount ears anyways so don't think it was just the oiling thing, which I am shocked no machine shop could scatter it drill it/clean it & assemble it. weird.
You could if you wanted put the internals into a machined LA360 block.
You could also sell a freshly machined MAG360 block +/-roller cam.
age is no lock on brillance
|
|
Posted: 09/03/08
03:08 PM
|
|
Just for the record the block and parts are still for sale....Mr_horsepower, has stopped responding to my messages, so for now item is still for sale
|
sid951
New User
| Posts: 1
| Joined: 10/08
Posted: 10/06/08
04:45 PM
|
|
Is this still 4 sale?
|
|
Posted: 10/19/08
08:31 AM
|
|
Yes, this engine is still for sale....
|
|
Posted: 11/24/08
07:38 AM
|
|
I am willing to negotiate on the price as well....
|